@conference {Gianni20162644,
	title = {A model-driven and simulation-based method to analyze building evacuation plans},
	booktitle = {Proceedings - Winter Simulation Conference},
	volume = {2016-February},
	year = {2016},
	note = {cited By 1},
	pages = {2644-2655},
	publisher = {Institute of Electrical and Electronics Engineers Inc.},
	organization = {Institute of Electrical and Electronics Engineers Inc.},
	abstract = {<p>Modern buildings are often expected to satisfy minimum safety requirements to define upper bounds for safety metrics, such as evacuation time. The building design must therefore consider prediction of these metrics for a set of representative evacuation scenarios. These scenarios can be rather complex, and often can be investigated only using building evacuation simulators. However, these simulators might require considerable development effort, and their use might therefore become less convenient, for time and cost issues. In this respect, this paper introduces a model-driven method to automatically develop building evacuation simulators from informal specifications of building evacuation scenarios, i.e., building plans and behavioral descriptions of evacuees. Specifically, the paper shows how a floor plan develops in the structural characteristics of an Extended Queueing Network (EQN) model and how the behavioral description can be used to parameterize the EQN model. The paper also presents an example application along with preliminary validation issues. {\textcopyright} 2015 IEEE.</p>},
	keywords = {Architectural design, Behavioral descriptions, Building components, Building design, Building evacuation, Buildings, Complex networks, Model-driven method, Modern buildings, Queueing networks, Safety requirements, Simulation-based method, Simulators, Structural characteristics},
	isbn = {9781467397438},
	issn = {08917736},
	doi = {10.1109/WSC.2015.7408372},
	url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84962833056\&partnerID=40\&md5=0f1ea728c9ece7012654f0b378a1486c},
	author = {Gianni, D. and Bocciarelli, P. and Andrea D{\textquoteright}Ambrogio and Iazeolla, G.}
}
@conference {Gianni2008,
	title = {A layered architecture for the model-driven development of distributed simulators},
	booktitle = {SIMUTools 2008 - 1st International ICST Conference on Simulation Tools and Techniques for Communications, Networks and Systems},
	year = {2008},
	note = {cited By 12},
	publisher = {ICST},
	organization = {ICST},
	abstract = {The development of a distributed simulator requires knowledge and skills that might be unavailable or difficult to acquire. Bringing model-driven approaches to the development of distributed simulators contributes to reduce both the need for specific skills and the development effort. To support this innovative development methodology, we introduce a layered simulation architecture named SimArch that allows to define simulation models that can be transparently transformed into simulation programs ready to be executed in a distributed (or local) mode. SimArch defines layers of services at increasing levels of abstraction on top of the execution environment, thus allowing developers to build distributed simulators without explicit knowledge about the execution environment (local/distributed) and the specific distributed simulation infrastructure (e.g., HLA). In order to show the effectiveness of the proposed approach, SimArch has been provided with an Extended Queueing Network (EQN) simulation language, which has been applied to the development of an example distributed simulator in the computer network domain. Copyright {\textcopyright} 200F ICST 978-963-9799-20-2.},
	keywords = {Computational linguistics, Computer networks, Computer simulation languages, Development methodology, Distributed computer systems, Distributed simulations, Execution environments, HLA, Model driven development, Network architecture, Network simulation, Queueing networks, Simulation architecture, Simulation framework, Simulators},
	isbn = {9789639799233},
	doi = {10.4108/ICST.SIMUTOOLS2008.3071},
	url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84923272498\&partnerID=40\&md5=512ca53ab563e55634811dc6f2c01695},
	author = {Gianni, D. and Andrea D{\textquoteright}Ambrogio and Iazeolla, G.},
	editor = {Heath J., Molnar S.}
}
@conference {D{\textquoteright}Ambrogio2007210,
	title = {Software technologies for the interoperability and reusability of distributed simulators},
	booktitle = {SISO European Simulation Interoperability Workshop 2007, EURO SIW 2007},
	year = {2007},
	note = {cited By 2},
	pages = {210-219},
	abstract = {Giving interoperability and reusability capabilities to distributed simulators is fundamental to the widespread use of distributed simulation. The HLA standard has introduced considerable improvements with respect to previous standards, though it suffers from shortcomings such as (1) lack of interoperability among different IEEE-compliant implementations, (2) no support to the adaptation and integration of individual federates and (3) poor reusability, which is limited to entire federates only. In this paper, we present two independent technologies that overcome such shortcomings. The first technology consists of a CORBA-HLA architecture that overcomes limitation (1), the second technology is a new development framework called SimJ that overcomes limitations (2) and (3). The CORBA-HLA architecture decouples federates from the specific HLA implementation so that federates can be effortlessly run on top of any HLA implementation that exposes services through an IEEE-complaint IDL interface. The SimJ framework eases the development of individual federates by providing a uniform and standard interface for local and distributed simulators, and makes it possible the reuse of components smaller than entire federates in both local and distributed simulators.},
	keywords = {Adaptability, Common object request broker architecture (CORBA), Computer architecture, Computer software reusability, Distributed simulations, Framework, HLA, Interoperability, Middleware, Reusability, Simulators, Software technology, Standard interface, Technology},
	isbn = {9781615671700},
	url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-84865354509\&partnerID=40\&md5=3cad39842c91176c439ae7bf7e6b17a1},
	author = {Andrea D{\textquoteright}Ambrogio and Gianni, D. and Iazeolla, G.}
}
@conference {D{\textquoteright}Ambrogio2006149,
	title = {SimJ: A framework to develop distributed simulators},
	booktitle = {Summer Computer Simulation Conference 2006, SCSC{\textquoteright}06, Part of the 2006 Summer Simulation Multiconference, SummerSim{\textquoteright}06},
	year = {2006},
	note = {cited By 10},
	pages = {149-156},
	abstract = {A distributed simulation (DS) is based on the use of several simulators distributed over a network infrastructure. Existing DS standards (e.g., HLA) only specify distribution services without giving support for developing individual simulators in a way to be compliant to the given standard. Traditionally, the development of individual simulators was facilitated by use of simulation languages (e.g., Csim, Arena, Extend, Modline, etc.) which however do not provide support to obtain interaction according to a given DS standard. The extension of such languages to include DS support is very problematic, especially in case of proprietary languages. For these reasons, the development of DS-compliant individual simulators is mostly done by use of standard programming languages (e.g., C, Java, etc.) with the additional effort of developing simulation mechanisms, model components and interfaces to the DS standard. This paper introduces SimJ, a Java library that minimizes such efforts, so that simulators can be developed as to be run on a single local host and can then be partitioned to be run over a set of networked hosts according to a given DS standard. The simulators SimJ addresses are discreteevent simulators (DES) and are easily portable to different DS standards. The paper illustrates the design guidelines of SimJ and presents an example use based on the HLA DS standard.},
	keywords = {C (programming language), Computer simulation languages, Discrete event simulation, Discrete-event simulators, Distributed simulations, Distribution services, HLA, Java, Java library, Model components, Network infrastructure, Simulation mechanisms, Simulators, Standard programming language, Standardization},
	isbn = {9781622763528},
	url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-50149099672\&partnerID=40\&md5=d2720c3ec54b8e318b0231b9ab847d3a},
	author = {Andrea D{\textquoteright}Ambrogio and Gianni, D. and Iazeolla, G.}
}
